| |
| D19-XXX : Round SCSI Internal
Cable |
| |
PRODUCT FEATURES |
 |
|
 |
• PVC Red Boot
at the connector to protect flat cable portion.
• Provides SCSI bus data rates of 160 Mbytes/sec.
• Increases air flow among SCSI devices, reduce heating problems.
• Provides differential data integrity.
• Cable: 30 AWG, 34 twisted pairs, shielded.
• Connectors: Half pitch d-sub 68 pin male IDC type with strain
relief; Pull tab attached with red PVC boot.
• Terminator: SCSI 3 Ultra-160 LVD/SE type attached with
the cables.
|
|
|
| PRODUCT
BULLETIN | SPEC
SHEET |
| Part Number |
Description |
| D19-218 |
2 x SD68 pin internal cable w/ attached
terminator, for connecting 1 device, 18 inches |
| D19-224 |
2 x SD68 pin internal cable w/ attached
terminator, for connecting 1 device, 24 inches |
| D19-236 |
2 x SD68 pin internal cable w/ attached
terminator, for connecting 1 device, 36 inches |
| D19-318 |
3 x SD68 pin internal cable w/ attached
terminator, for connecting 2 device, 18 inches |
| D19-324 |
3 x SD68 pin internal cable w/ attached
terminator, for connecting 2 device, 24 inches |
| D19-336 |
3 x SD68 pin internal cable w/ attached
terminator, for connecting 2 device, 36 inches |
| D19-436 |
4 x SD68 pin internal cable w/ attached
terminator, for connecting 3 device, 36 inches |
| D19-544 |
5 x SD68 pin internal cable w/ attached
terminator, for connecting 4 device, 44 inches |
| D19-652 |
6 x SD68 pin internal cable w/ attached
terminator, for connecting 5 device, 52 inches |
| D19-760 |
7 x SD68 pin internal cable w/ attached
terminator, for connecting 6 device, 60 inches |
| D19-868 |
8 x SD68 pin internal cable w/ attached
terminator, for connecting 7 device, 68 inches |
|
| |
| back to SCSI Products
: Internal Cables |
|
|
